Decibel Killers / Baffles for Triumph Bonneville Classic Silencers
£ 22.00 +VAT if applicable
Pair of short silencer baffles
Out of stock
Email when stock available
These short baffles can be installed in silencer tailpipes of 1.5inch (38mm) internal diameter to reduce overall noise levels.
Can be used with the Dunstall BBB48A3 & BBB48A3BK Silencers and Hyde Toga Silencers for Triumph New Bonneville
11 reviews for Decibel Killers / Baffles for Triumph Bonneville Classic Silencers
Only logged in customers who have purchased this product may leave a review.
YOU MAY ALSO BE INTERESTED IN THE FOLLOWING PRODUCT(S)…
-
Exhausts - New Bonneville
Silencers
Hyde Toga Silencers
Exhaust Systems
New Bonneville Parts
Toga Norman Hyde Classic Silencers (Pair) – Triumph Bonneville – 08 & T100
£ 374.17 +VAT if applicablePart Number: HBS105More Information.. -
Exhausts - New Bonneville
Dunstall Parts
New Bonneville Parts
Black Chrome Aftermarket Silencers – Triumph New Bonneville/T100
£ 225.00 +VAT if applicablePart Number: BBB48A3BKMore Information.. -
Best Sellers
Exhausts - New Bonneville
Slip On Silencers
Silencers
Dunstall Parts
Exhaust Systems
New Bonneville Parts
Popular Parts
Dunstall Clubman Bonneville
Aftermarket Dunstall Silencers for Triumph New Bonneville – UK Made
£ 250.00 +VAT if applicablePart Number: BBB48A3More Information.. -
Exhausts - New Bonneville
Exhaust Pipes
Silencers
TEC Bike Parts
Exhaust Systems
New Bonneville Parts
TEC 2-2 Clubman Stainless Steel Exhaust System – Triumph New Bonneville
£ 308.33 +VAT if applicablePart Number: DUNEX2More Information..
George E. (verified owner) –
Good quality, had to buy extra baffles as they were quite noisy but now bike sounds great.
David H (verified owner) –
See my other review on the Dunstall silencers. I found them a tad too loud so bought and fitted these. They do give a subtle but welcome reduction in the noise level. But I felt the need to do some fiddly DIY mods to fit them. The self tapping screws that come with them just don't look like they'll stay put for long (I may be wrong) so I drilled out the pipes and baffles with 5mm bit and used some M5 nuts/bolts/lock washers to secure them. Doesn't look too ugly and much more solid feeling fitting. Had to remove the pipes again to do this. Would help to have a photo with them fitted and some fitting instructions. I would have preferred if they could be fitted further inside the tail pipe but cannot due to position of fixing hole. So they do look a bit odd……hence the 3 stars.
Geert K. (verified owner) –
It was easy place ,using a 4 mm bolt to fixed the decibel killers.
The Decibel Killers take a little noise a way ,expected not too much of it
,
Richard B. (verified owner) –
.
Guest (verified owner) –
Fits perfectly in Dunstall silencers. Screws are not nice, replaced them with 3mm round headed stainless and nuts.
Vincent S. (verified owner) –
Hi can't fault your service spot on ,the actual decibel killers are not that affective at lowering the noise and had to be drilled to fit a decent stainless fixing bolt instead of the cheap self tappers that came with them however in saying this I will buy other bits from you in the future .
Neil C. (verified owner) –
Great service
Jonathan L. (verified owner) –
Pleased with product and service.
Kenny G. (verified owner) –
Just about right.
Slim E. (verified owner) –
I recently got the Dunstall pipes and while I like them, they sound a bit "raspy" to me at higher rpms so I got the Decibel Killers hoping to mellow the tone a bit. They make a very slight difference but not much. It's a slight improvement. They were easy to install. I had looked for reviews before buying but could find no info on how effective they were. Where are all the reviews?
NIGEL L. (verified owner) –
What a great sound!
10 year old Bonnie brought to life.
The decibel baffles will keep the neighbors happy otherwise it could be a bit loud.
Quick delivery easy to fit ( if the original nut did'nt spin in the metal)
Getting it mapped next week then out and about
Cant wait