Taper Head Race Set – BSA A / B & M Models 1937-70

Part Number : 66-4149A Categories: , ,
(14 customer reviews)

£ 48.00 +VAT if applicable

BSA Steering Taper Head Race Set by SRM

In stock

5.00 out of 5
Part Number : 66-4149A Categories: , ,

SRM Steering Taper Head Race Set 

Direct replacement for the old cups and cones with ball bearings, with no modifications required.

Taper bearings are superior than any other bearing for the steering head, as they provide angular support , and give positive and smooth steering operation.
Also give a very long service life if kept greased up.

Suitable for BSA A / B & M Models 1937-70 Girder & Tele Fork Models;

  • BSA A50 / A65 1962-70
  • BSA A7 / A10
  • BSA M19 / M20 / M21 / M22 / M23
  • BSA B31 / B32 / B33 / B34 / DBD Goldstar
  • BSA B20 / B23 / B21 / B22 / B24 / B25 / B26

 

Rigid and plunger models will have to have the inner corner edge of the frame relieved where the steering stem passes through the area where the outer race cup sits in the frame , there is a sharp corner edge here, and it will need to be chamfered by a Dremmel or similiar tool to clear the inner bearing race when it sits in the outer race. See image above.

Replaces BSA part number 99-9912

MADE IN ENGLAND by SRM Engineering

 

 

14 reviews for Taper Head Race Set – BSA A / B & M Models 1937-70

  1. Keith W. (verified owner)

    When ordering parts by telephone the knowledge of which parts fit your particular machine is fantastic, The service either by telephone is excellent and the delivery times impressive I chose super postie.
    Thank you.
    Keith Wright

  2. Keith W. (verified owner)

    When ordering parts by telephone the knowledge of which parts fit your particular machine is fantastic, The service either by telephone is excellent and the delivery times impressive I chose super postie.
    Thank you.
    Keith Wright

  3. William H. (verified owner)

    Easy to fit, transformed the handling of the bike which was trying to stay in a straight line. The old bearings didn't look that bad.

  4. William H. (verified owner)

    Easy to fit, transformed the handling of the bike which was trying to stay in a straight line. The old bearings didn't look that bad.

  5. Guest (verified owner)

    Great item replaces old ball bearing type and having a drawing for the installation

  6. Guest (verified owner)

    Great item replaces old ball bearing type and having a drawing for the installation

  7. Henning G. (verified owner)

    Excelent service,god cumunication,fast delevery…Thanks a lot

  8. Henning G. (verified owner)

    Excelent service,god cumunication,fast delevery…Thanks a lot

  9. Simon J. (verified owner)

    Excellent

  10. Simon J. (verified owner)

    Excellent

  11. Bill H. (verified owner)

    Good deal. Bearings were shipped promptly. Item description was accurate.

  12. Bill H. (verified owner)

    Good deal. Bearings were shipped promptly. Item description was accurate.

  13. Bruno M. (verified owner)

    Good deal

  14. Bruno M. (verified owner)

    Good deal

Only logged in customers who have purchased this product may leave a review.