Morgo Rotary Oil Pump – Triumph Unit Models T100/TR6/T120/TR7/T140

Part Number : 70-6928RM Categories: , , ,

£ 168.00 +VAT if applicable

Morgo Unit Rotary Oil Pump for Triumph Twin

In stock

0 out of 5
Part Number : 70-6928RM Categories: , , ,

Morgo Rotary Type Aftermarket Oil Pump

Manufacturer's Description
The Morgo Super Rotary pump is capable of delivering approximately twice the oil of a standard plunger pump even when the oil is very hot. A rotary pump of the new type will still pump oil adequately when the oil is in a very contaminated condition, and the pump is very worn. Normally the contamination in the oil would hold open the ball valves in the plunger type pumps and stop the pump working at pressure, scavenge or both. Resulting in either no oil pressure or the crank case full of oil. No number of extra ball valves can eliminate this possibility.

No modifications are needed just take off the old pump and fit the new.

Suitable for Triumph Unit Construction Models, 350cc, 500cc & 750cc:

  • Triumph T21 / T90 350cc
  • Triumph T100 1958 on
  • Triumph TR6 Trophy / T120 Bonneville 1963 on
  • Triumph TR7 Tiger / T140 Bonneville 1973 on (NOT SUITABLE FOR ELECTRIC START MODELS)


Replaces original oil pump 70-6928