Mega Type Chrome Silencers for BSA/Triumph 1971-73 (Pair)

Part Number : 71-2382 Categories: ,
(5 customer reviews)

£ 199.00 +VAT if applicable

Pair of Mega Type Chrome Silencer for BSA A65/A70 (Also B25/B50) & Triumph TR6/T120/TR7/T140/T150 1971-73

Out of stock

Email when stock available

Part Number : 71-2382 Categories: ,

Pair of Mega Type Chrome Silencers for BSA A65/A70 (Also B25/B50) & Triumph TR6/T120/T140/T150 1971-73

For 1 1/2" pipe, approx 26 1/2" Long overall

UK Made, great quality chrome

Suitable for :

  • BSA A65 1971-72
  • BSA A70 Lightning
  • BSA B25 / B50 1971-72 (low level pipe type)
  • Triumph TR6 Trophy / T120 Bonneville 650cc 1971-73
  • Triumph TR7 Tiger / T140 Bonneville  750cc 1973
  • Triumph T150 Trident 750cc 1971-73


Part Number 71-2382

5 reviews for Mega Type Chrome Silencers for BSA/Triumph 1971-73 (Pair)

  1. Chris W. (verified owner)

    Great pipes very impressed with quality and price. Thanks BBB

  2. Paul B. (verified owner)

    They look great on the viewable side when installed on your bike, really sharp, a couple lower quality chroming problems as far as the chrome look was evident on the side of the muffler that faces the spokes/ like a distortion in the chrome / not viewable to the public eye, so for me since it wasn’t rust, I’m ok with it and would recommend them. No one will see the inside view of the muffler. Very important point that I’d like to share: they are not loud mufflers on my 1974 750cc Triumph Bonneville, and are just slightly quieter than my stock rusted-out mufflers that these Silencers have copied “to the T”, as in the bends and shapes, they are just like the originals that this bike has had all its life. Thank you. But if you want louder pipes, these are not them. And I don’t know if anyone does?? For me they are slightly bassier then the ‘originals’ that is a word. The inside ‘cage’ of the inside muffler when you look down the pipe from the back of the bike, is already rusting a little as when it arrived at my house right out of the box, but my motor will ‘soot it up’ in no time. So yes, I would recommend them and their fare price $. But as a company I would always check the ‘outside view on mufflers before they leave. Then again, that might me an impossible task to hand check each item. Lastly, I had to grind down the ‘bar of iron that has the bolt threads in them to hold the mufflers to the my bike, because the new mufflers had a 1/4 inch smaller more tapered opening to accept the original ‘bar’. I had a grinder but you may have someone who doesn’t that might run into that problem. Maybe you sell that part already to be sold with the new mufflers. Let me know if you do cause the threads on mine are not great after 42 years of shaking.So I rambled on, but I would welcome hearing this if I were the owner. I would order from you again on the basis of these mufflers. I ran the bike without mufflers and was shocked that it wasn’t bad at all. Wish the cops would be ok with it. Best.

  3. Fredy (verified owner)

    Very close to the original. Good price-performance Ratio.

  4. Steinar D. (verified owner)

    Very nice part,Nice welding

  5. Glen Dixon (verified owner)


Only logged in customers who have purchased this product may leave a review.

What Our Clients Say
7718 reviews