Description
12v Boyer Bransden Micro-Power MKIV Ignition Kit for BSA & Triumph Twins and Royal Enfield Interceptor
This kit negates the need for the auto advance unit, points, points plate and condensers which can be the cause of running problems. This kit contains everything needed for the conversion.
Micro Power Kit consists of;
a) Transistor Box (BLUE box with wires)
b) Stator Plate (round printed circuit board with two coils)
c) Magnetic Rotor (round plated steel unit with two magnets)
d) 1.25" x 0.25" BSF bolt (Norton)
e) 1.25" x 0.25" UNF bolt (Triumph)
f) Plastic strap
g) Coil positive earthing wire, red 1ft.
h) Terminals: 4 female spades, 1 piggyback spade, 2 male bullets & 1 ring.
I) Dual output digital ignition coil, bolts/nuts/washers, h.t.clips, boots & tie-straps
j) Two NGK suppressed plug caps, 1metre h.t. lead
Suitable for positive or negative earth, points on side Models
Manufacturers Description
The Boyer Bransden range of Analogue MKIII ignition units are being progressively changed to improved MKIV versions. The changes are designed to improve the timing stability if engine starting with a very low or variable battery voltage. The design changes are internal and do not affect the external appearance of the unit. Identified by the 'MKIV' caption on the label the new units are fully interchangeable with previously produced MK3 and MK1a units, and offer improved performance for both electric and kick start machines. All Digital and Power designs will remain as before.
Additional Information