Boyer Micro Power Ignition Kit – Triumph 18D2 Models

Part Number : KIT00262 Categories: , ,
(1 customer review)

£ 170.00 +VAT if applicable

Boyer Micro Power Ignition Kit for Triumph 18D2 Models

In stock

5.00 out of 5
Part Number : KIT00262 Categories: , ,

Boyer Micro Power High Power Ignition Kit

Replaces LU425219 Points / Contact set

Suitable for; Various 18D2 Distributor Models;

  • Triumph T21 / 3TA Speed Twin / 5TA Speed Twin / T90 / T100 1958-63
  • Triumph Pre-Unit 6T Thunderbird 1960-62
  • Norton Dominator 88 / 99 coil ignition 1959-1963
  • Royal Enfield 500 Meteor Minor 1959-62
  • Royal Enfield 700cc
  • Matchless Twins G9 / G12
  • AJS Twins Model 20 1959-63 / Model 31

This kit requires supressed plug caps

Please note, installation of this kit requires you to modify your distributor body, see instructions for more details

If you bike is still 6v, the alternator can be made 12v by connecting 2 of the wires. You will also require a zenor diode in the system or the Boyer Powerbox (consists of zenor diode, capacitor and rectifier). Obviously, battery and bulbs will also need updating to 12v.

Kit Consists of;

a) Transistor BOX00210 (Blue plastic box with 5 wires)
b) Stator Plate DT1a (printed circuit board with coil)
c) Magnetic Rotor ROT00114
d) 3 X 4BA X 1/4” SL screws & shake proof washers
e) Plastic strap, Coil positive earthing wire, red 1ft.
f) Terminals: 4 female spades, 1 piggyback spade, 2 male bullets & 1 ring.  (Steel disc with magnets)
g) Dual output digital ignition coil, COIL00008
h) bolts/nuts/washers, h.t.clips, boots & tie-straps

Part number KIT00262

View Instructions Here

1 review for Boyer Micro Power Ignition Kit – Triumph 18D2 Models

  1. Stephen M. (verified owner)

    Hi,

    The kit is just what I was looking for. Excellent service. Thanks.

Only logged in customers who have purchased this product may leave a review.

What Our Clients Say
7682 reviews