Girling CP2696 Brake Calipers – Triumph, Norton etc
£ 109.00 +VAT if applicable
Replica CP2696 Brake Caliper CP2696-38E0
Only 2 left in stock
Replica CP2696 Brake Caliper (Sold Each) Girling Boxed
Manufactured on brand new tooling, this caliper can be used as a replacement for the BSA,Triumph 60-4101 cast iron caliper, or for classic race/big brake conversions.
Light alloy construction with anodised surface finish, and hard anodised brake pistons.
These calipers are left or right handed and superseded the earlier CP2195. Improvements were made to the finning to improve strength and cooling. Plus the caliper was lengthened slightly to give a bigger swept area on the disc.
To use on the oposite hand the bleed nipple just needs swapping over.
Originally fitted to the Royal Enfield Rickman Interceptor, Triumph T140 Bonneville and various race bikes throughout the 1970's and 80's including Ducati, Egli, Seeley etc.
Can be used instead of the 60-7484/60-7485 (CP2195) left and right calipers as fitted to Triumph T140 Bonneville (Late double disc models)
Can also be used in place of 60-4101 Triumph T140 Bonneville / TR7 Tiger/T150 Trident / T160 Trident (ONLY FOR USE ON FRONT DISC)
Please note, this caliper will not fit with the caliper cover 37-4263, or the late T140 rear caliper plate with top mounted caliper
Race Use Only.
Not supplied with pads!
Specification
Piston Diameter mm | 41.3 x 2 |
Piston Area cm² | 26.8 |
Disc Diameter Max mm | 304 |
Disc Thickness mm | 6.4 |
Weight Kg | 0.9 |
Hydraulic Threads | 3/8 x 24UNF |
Mounting Centres | 89 |
Offset | 19.1 |
Mounting Hole Diameter | 10.2 |