Alloy Belt Drive Kit – Triumph T140 Bonneville/TR7
£ 330.00
Alloy Belt Drive Kit complete with Alloy Friction plates for Triumph T140 Bonneville and TR7
In stock
Alloy Belt Drive Kit complete with Alloy Friction plates
Suitable for Triumph T140/TR7 Models
Hard anodized alloy clutch basket with syncroflex belt which can run wet or dry
28 Tooth Engine Pulley x 55 Tooth Clutch housing
Can Run Dry for racing use, but are not affected by the weather.
These belts are lighter, more efficient and better wearing than steel chains.
Standard Warranty 12 Months. Note, this does not cover racing use.
Components Made in England, Belts Made in Europe
Triumph T140/TR7 Belt Drive Fitting Notes
The front pulley plate should be to the outside, with the shoulder inwards, as per original sprocket.
Set up of the clutch is as original, all components used are standard. For more detailed instructions refer to the bike's workshop manual
NO TENSIONER REQUIRED when using a belt. Belt tension should allow a 90 degree twist.
YOU MAY ALSO BE INTERESTED IN THE FOLLOWING PRODUCT(S)…
-
Complete Clutch Assemblies
Clutch Parts
Complete Alloy Clutch Assembly – Triumph T140 Bonneville/TR7 Tiger
£ 321.67 – £ 377.67Part Number: 57-4903AMore Information.. -
Complete Clutch Assemblies
Clutch Parts
Complete Clutch Assembly – Triumph T140 Bonneville/TR7 Tiger
£ 280.67 – £ 336.97Part Number: 57-4903More Information..