Alloy Belt Drive Kit – Triumph T120 Bonneville/TR6 Trophy 1963-73
£ 279.99 – £ 333.99 +VAT if applicable
Alloy Belt Drive Kit complete with Friction plates for Triumph T120 Bonneville /TR6 Trophy/6T Thunderbird Unit Construction Models
Alloy Belt Drive Kit for Triumph T120 Bonneville / TR6 Trophy / 6T Thunderbird Unit Models 1963-73
Hard anodized alloy clutch basket with belt which can run wet or dry
Can Run Dry for racing use, but are not affected by the weather.
These belts are lighter, more efficient and better wearing than steel chains.
Standard Warranty 12 Months. Note, this does not cover racing use.
FITTING SAME AS A STANDARD CHAIN, BUT NO TENSIONER REQUIRED
Components Made in England, Belts Made in Europe
Triumph T120/TR6 Belt Drive Fitting Notes
The front pulley plate should be to the outside, with the shoulder inwards, as per original sprocket.
Set up of the clutch is as original, all components used are standard. For more detailed instructions refer to the bike's workshop manual
NO TENSIONER REQUIRED when using a belt. Belt tension should allow a 90 degree twist.
Only logged in customers who have purchased this product may leave a review.