STEEL BELT DRIVE KIT – TRIUMPH PRE UNIT 500/650

Steel Belt Drive Kit complete

PLEASE NOTE, THIS KIT NO LONGER INCLUDES FRICTION PLATES

Suitable for Triumph Pre Unit Swinging Arm Models 500cc & 650cc circa 1955-62

• Triumph TR6 Trophy
• Triumph T120 Bonneville
• Triumph 5T Speed Twin
• Triumph 6T Thunderbird
• Triumph TR5 Trophy
• Triumph T100 Tiger (up to 1959)
• Triumph T110 Tiger

All other parts can be used from your exisitng clutch without modification. Please note, this belt drive kit runs with the original type alternator setup. if you have replaced this with the later encapsulated version this belt drive kit will not fit.

Steel clutch basket with belt which can run wet or dry

Can Run Dry for racing use, but are not affected by the weather.

These belts are lighter, more efficient and better wearing than steel chains.

Standard Warranty 12 Months. Note, this does not cover racing use.

Components Made in England, Belts Made in Europe

Fitting Notes

For fitting, the alternator mounting ring will need spacing 5/16" (8mm) - Spacers not supplied

If fitting a primary cover (not advised with a belt drive kit) then you will need to purchase a 1/4" chaincase spacer from Triumph Cafe Racer Parts (Steve Blackwell)